Schultz & Larsen Victory Rifle

Schultz & Larsen | Victory

Timeless elegance is incorporated into every aspect of the Schultz & Larsen Victory.   The one-piece bolt slides with a glass like smoothness in the perfectly polished and blued action. Attention to detail abounds from the carefully sculpted curves of the action to the swept back bolt handle with the hollow cavity in the ball to reduce just a tiny bit more weight. Average weight of the Victory with the standard barrel is a trim 3.6 kg. Fluted barrels reduce this to between 3.4 kg and 3.5 kg. Magnum calibres come in at 3.7 kg.

Classic Walnut Victory Synthetic

As standard, the Victory is equipped with the excellent Schultz & Larsen single stage trigger, adjustable for weight and length. The Schultz & Larsen designed and made double stage Match trigger is available as an option. On this trigger the first stage of the pull takes 60% of the total pull weight, leaving a final light and crisp second stage.

Schultz & Larsen Victory Rifle

The Victory stock features a raised comb and comfortable cheek piece. The elegant lines are complimented by a rosewood forearm tip and matching grip cap. Wood upgrades are available from Grade 2 through to Grade 6 Exhibition, all with a linseed oil finish to enhance the figure and beauty of the wood.

Standard recoil pad colour is brown but a traditional brick red pad is an option on the higher wood grades.

The Victory is available in Right or Left hand.

Schultz & Larsen Victory Rifle

Switch Barrel System

The Victory has a switch barrel system allowing the barrel to be changed for any other in its calibre group with just a simple wrench.  The standard bolt can be used with all calibres in the standard calibre group but if changing to a Magnum calibre you will need to change the bolt.

Schultz & Larsen Bolt
Schultz & Larsen Victory Rifle

Scope Mounting

The top of the Victory action is milled to accept the Schultz & Larsen ‘Slide & Lock” scope mounts, incorporating Summer and Winter scope position.  For those who prefer a different mount, the action is drilled and tapped to accept Weaver or other bases.  The radius of the action is 17mm and the hole spacing 22mm

Schultz & Larsen Victory Rifle
Schultz & Larsen Victory Rifle with Scope Schultz & Larsen Victory Rifle with Scope

Sling Swivels

There are two sling swivel studs pre-fitted to the Victory. One is at the rear, on the bottom of the stock in front of the recoil pad, and one on the forearm. The swivel studs accept sling swivels of 8mm wide, with 3.5mm pin diamter. See our available options in the Accessories Section.

Schultz & Larsen Victory Sling Swivels

Safe Construction

Safety has top priority with all locking parts designed and tested to withstand at least three times normal load.  In the case of an overload resulting in a primer blow-out or case rupture, the high pressure gas can escape through holes in the front of the action and on the side of the bolt.  This, coupled with the extremely tight fit of the bolt and action, ensures that the shooter is not injured.

The safety catch is three position and locks the bolt and blocks the firing pin.  The centre position allows unloading of the rifle whilst the safety is engaged.

Schultz & Larsen Bolt
Schultz & Larsen Classic Bolt

The Victory Bolt

The bolt lift is 60º making it a fast an effective mechanism. The Victory's bolt handle sweeps backwards to match the overall elegant look of the rifle. The perfectly machined bolt glides into the action effortlessly and locks into the barrel once closed. There are two variations of bolt, one is typically marked "S" for Standard Calibres and the other is marked "M" for Magnum Calibres.

Schultz & Larsen Bolt

Schultz & Larsen Victory

Calibres | Standard

.22-250 (K) 6mm XC (1 Skud)
.243 Win (K) .25-06 (L)
6.5x47 Lapua (K) 6.5x55 SE (L)
6.5-284 (M) 6.5 Creedmoor (K)
.270 Win (L) 7x57 (L)
7x64 (L) 7mm-08 (K)
.308 Win (K) .30-06 (L)
.338-06 (L) 8 x 57 JS (L)
9.3x62 (L)  

Calibres | Magnum (Magnum Bolt Required)

7mm Rem Mag (M) .300 Win Mag (M)
.300 WSM (KM) .270 WSM (KM)
.338 Win Mag (KM) .358 Norma Mag (M)

Calibres | Safari

.375 Ruger (M) .416 Taylor (M)
.458 Win Mag (M)  

(Magazine Sizes in brackets - K=Standard, L=Long, M=Magnum, KM=Short Magnum)
Schultz & Larsen Victory Rifle

Sound Moderators

Schultz & Larsen manufacture their own range of sound moderators, designed to complement their rifles.  The range includes both muzzle mounted and over-barrel moderators, all designed to withstand repeated firing with heavy calibres.  The popularity of the Schultz & Larsen moderators is such that a range of thread sizes are available to fit other rifle brands.